Specifications

MAGIC CPC Specifications

Model MAGIC200

Particle Size Range

5 nm to ~2.5 µm diameter at factory temperature settings; tested with monodisperse sucrose aerosol

Orientation

Short term operation in any orientation – insensitive to tipping, shock or vibration. Upright orientation recommended for long-term operation .

Sample Flow Rate

0.3 L/min

Pump and Flow

Internal diaphragm pump with active flow monitoring for concentration calculations

Concentration Range

0.01 to 105 particles/cm3 single particle counting with live-time coincidence correction

Averaging Time

1 to 300 seconds, user selectable

Precision

Concentration measurement precision within 10% for co-located units sampling the same aerosol

Working Fluid

Water (distilled or cleaner)
Manual water charging with a wick wetting tool

Operating Time

Continuous operation >24 hrs at inlet sample RH of 50% before needing a water recharge. Operation time can be extended with optional pre-conditioning humidifier – see accessories below.

Growth Tube Temperatures
(factory settings)

Conditioner: 10oC
Initiator: 45 oC
Moderator: variable; automatically set based on inlet dew point
Optics: 40°C
Fixed temperatures are user settable and can be varied from the factory default.
Option to run in “relative temperature” mode based on inlet conditions.

Inlet

¼ inch OD stainless tube

Display

4 x 20 VFD

Data Logging

On-board non-volatile data storage. 125,000 records; approximately 1 week of 5-sec averaged data

Communications

Serial USB and RS-232 9-pin DIN; digital pulse BNC

Output Data

Timestamp, concentration, raw counts, live time, clock time, temperature readings, input T/RH, flow

Power

100-240 VAC / 12 VDC
16 Watts
Auto-recovers after power failure

Dimensions

LWH 18.5 cm x 16.5 cm x 21 cm

Weight

2.1 Kg (excludes pre-conditioning humidifier, battery or power supply)
Power supply and line cord weight adds 0.4 Kg

Environmental Operating Conditions

Ambient Temperature 10- 40 oC
Cabinet Humidity – 5 to 95% RH, non-condensing
CPC must be housed in room, enclosure or weather protected environment

Warranty

One year

STANDARD ACCESSORIES

Power supply and cord
Wick wetting tool
Instruction manual

Calibration

Factory service recommended annually

Maintenance

Wick replacement – recommended annually

OPTIONAL ACCESSORIES:

Model PCH200
Pre-Conditioning Humidifier

Nafion® tube humidifier attaches unobtrusively to CPC inlet to increase the relative humidity RH, allowing for long term operation in dry air.
Humidifier inlet: ¼ inch OD SS tube
Humidifier dimensions: LWH 7.5 cm x 2 cm x 3 cm
Humidifier water bottle and bracket add 4.5 cm to length (depth) of CPC case
Humidifier, water bottle and bracket weight (without water): 0.2 Kg

Model Batt200
External Battery


Lithium Ion, rechargeable
Battery bracket adds 4.5 cm to width of CPC case
Bracket and battery weight: 0.5 Kg

Nafion® is a registered trademark of The Chemours Company FC, LLC

Specifications are subject to change without notice.